EN706 - Polyurethane Residue Remover
- Does Not Contain Solvents Or Harsh Chemicals
- Penetrates & Breaks Down PU's Bonds
- Safe To Use On Metals
Remove cured polyurethane residues from large items that cannot be soaked.
While polyurethane is a brilliantly versatile material, it can pose a challenge to those who use it to manufacture products. No matter how much care you take it is imposable to avoid PU residue. This may be caused by over runs and spills or just build up from regular use. No matter how it happens it, cured polyurethane residue can radically reduce the efficiency of a machine and its components and if not cleaned will seriously shorten its working life.
Many components can be removed and soaked in EN705 Solvent free Polyurethane Residue Remover to allow residue polyurethane to be simply brushed away. In many situations, it is either not practical or even possible to soak an effected area. EN706 Solvent free Polyurethane Residue Remover Gel offers the same great cleaning power as EN705, but in a gel format. This allows it to be painted directly onto cured polyurethane where it will penetrate and brake its bonds. This will soften the polyurethane allowing it to be easily removed.
EN706 Solvent free Polyurethane Residue Remover Gel is formulated to combine great cleaning with lo hazard levels. EN706 does not contain dangerous solvents or harmful chemicals like Methylene Chloride (DCM), NMP or NEP. This removes many of the issues with storage or use posed with traditional products. EN706 is also much more environmentally friendly than traditional products removing many of the issues regarding disposal after use.
Suitable for use on aluminium and stainless steel.
You may also be interested in these other Polyurethane residue removal products
EN705 Solvent Free Polyurethane Residue Remover – Ideal for removable items that can be detached and soaked to remove cured Polyurethane residue (Only aluminium and stainless steel.)
EN720 Solvent Free Polyurethane Flushing Compound – Ideal for flushing Polyurethane residue from machinary and clearing no cured Polyurethane
EN710 Anti-Rust Polyurethane Remover Liquid – Ideal for items and surfaces made from metals that can be easily corroded. (Iron, Copper, Zinc and some Alloys)
- Use on cold surfaces for best results.
- Use neat, cover area to be cleaned liberally with gel.
- Leave until deposit softened (min 2 hours).
- Wipe off with a clean cloth, stiff brush or paint scraper.
- Avoid extended contact with steel or plated metals.
- Clean off residue with inhibited parts wash detergent if used on steel.
Sorry no videos have been left for this product yet.