Industrial

EN718 Heavy-Duty Deep Freeze Floor Cleaner (pre-spray)

PRODUCT CODE: EN718
£230.00
VARIATION: Please Select
(10 in Stock)
EN718 Heavy-Duty Deep Freeze Floor Cleaner is designed to be used within a deep freeze area where temperatures drop to around -28°C.Many floors in industrial deep f...
Read More

EN718 Heavy-Duty Deep Freeze Floor Cleaner is designed to be used within a deep freeze area where temperatures drop to around -28°C.


Many floors in industrial deep freeze warehouses have never been cleaned for the simple reason that at an ambient temperature bewtween -20 to -28°C normal floor cleaners would freeze on contact and turn your warehouse into a skating rink!!

Therefore dirt builds up over many years as the only option is to sweep but the fork lifts compress the dirt and mix with tyre marks that in one supermarket RDC after 5 years they had a 10mm thick layer of rubber, dirt, dust ....all combined into a shiny hard surface.

This shiny hard surface became  slippery with the moisture in the air and the potential of accidents was very high.

The option to clkean the floor was limited to emptying all the stock and turning the freezer off and then cleaning the floor, but in reality this was not feasible.

Another alternative was to use a solvent that does not freeze to clean the  floor......however solvents are flammable and warehouses are expensive!!


Bio8 were approached by Tennant Company, the worlds leading cleaning machine company to see if we could create a product that would work at -28°C.

Our chemists developed a new blend of raw materials and surafctants that provided both a un-freezable cleaning solution but with the ability to cut through years of built up, ground in dirt and EN718 Deep Freeze floor cleaner was born.


Due to the extreme environment a scrubber dryer has been customised by Tennant company to deal with the extreme temperatures it will operate in with anti-freeze, wider and longer pipework to account for pipework contracting in extreme cold and also heavy duty batteries as cold weather can reduce the battery life dramatically.


  • Apply by pressure sprayer to the floor.
  • Leave for around 5 minutes.
  • Dry scrub with black pads to break up any rubber residues.
  • Use maximum pressure and slow walking pace with NO vacuum collector operational.

Sorry no FAQs have been left for this product yet.

Sorry no videos have been left for this product yet.

Sorry no documents have been left for this product yet.